USAPhO 2008, Полуфинал — Задача 7. Optical Society of America Bonus Question

AAPT AIP UNITED STATES PHYSICS TEAM 2008 — Semifinal Exam

Important Instructions for the Exam Supervisor

DO NOT DISTRIBUTE THIS PAGE

  • This examination consists of three parts.
  • Part A has four questions and is allowed 90 minutes.
  • Part B has two questions and is allowed 90 minutes.
  • Part C has one question and is allowed 20 minutes. The answer for Part C will not be used for team selection, but will be used for special recognition from the Optical Society of America.
  • The first page that follows is a cover sheet. Examinees may keep the cover sheet for all three parts of the exam.
  • The three parts are then identified by the center header on each page. Examinees are only allowed to do one part at a time, and may not work on other parts, even if they have time remaining.
  • Allow 90 minutes to complete Part A. Do not let students look at Part B or Part C. Collect the answers to Part A before allowing the examinee to begin Part B. Examinees are allowed a 10 to 15 minutes break between parts A and B.
  • Allow 90 minutes to complete Part B. Do not let students look at Part C or go back to Part A. Collect the answers to part B before allowing the examinee to begin Part C. Examinees are allowed a 10 to 15 minutes break between Parts B and C.
  • Allow 20 minutes to complete Part C. This part is optional; scores on Part C will not be used to select the US Team. Examinees may not go back to Part A or B.
  • Ideally the test supervisor will divide the question paper into 4 parts: the cover sheet (page 2), Part A (pages 3-7), Part B (pages 8-10), and Part C (page 11). Examinees should be provided the parts individually, although they may keep the cover sheet.
  • The supervisor must collect all examination questions, including the cover sheet, at the end of the exam, as well as any scratch paper used by the examinees. Examinees may not take the exam questions. The examination questions may be returned to the students after March 31, 2008.
  • Examinees are allowed calculators, but they may not use symbolic math, programming, or graphic features of these calculators. Calculators may not be shared and their memory must be cleared of data and programs. Cell phones, PDA's or cameras may not be used during the exam or while the exam papers are present. Examinees may not use any tables, books, or collections of formulas.
  • Please provide the examinees with graph paper for Part A.
Указания

DO NOT OPEN THIS TEST UNTIL YOU ARE TOLD TO BEGIN

  • Work Part A first. You have 90 minutes to complete all four problems. Each question is worth 25 points. Do not look at Parts B or C during this time.

  • After you have completed Part A you may take a break.

  • Then work Part B. You have 90 minutes to complete both problems. Each question is worth 50 points. Do not look at Parts A or C during this time.

  • Show all your work. Partial credit will be given. Do not write on the back of any page. Do not write anything that you wish graded on the question sheets.

  • Start each question on a new sheet of paper. Put your school ID number, your name, the question number and the page number/total pages for this problem, in the upper right hand corner of each page. For example,

    School ID #
    Doe, Jamie
    A1 - 1/3

  • A hand-held calculator may be used. Its memory must be cleared of data and programs. You may use only the basic functions found on a simple scientific calculator. Calculators may not be shared. Cell phones, PDA's or cameras may not be used during the exam or while the exam papers are present. You may not use any tables, books, or collections of formulas.

  • Questions with the same point value are not necessarily of the same difficulty.

  • Part C is an optional part of the test. You will be given 20 additional minutes to complete Part C. Your score on Part C will not affect the selection for the US Team, but can be used for special prizes and recognition to be awarded by the Optical Society of America.

  • In order to maintain exam security, do not communicate any information about the questions (or their answers/solutions) on this contest until after March 31, 2008.

Possibly Useful Information

Possibly Useful Information. You may use this sheet for all three parts of the exam.

g=9.8 N/kgg = 9.8\ \mathrm{N/kg} \qquad G=6.67×10−11 N⋅m2/kg2G = 6.67 \times 10^{-11}\ \mathrm{N \cdot m^2/kg^2}

k=1/4πϵ0=8.99×109 N⋅m2/C2k = 1/4\pi\epsilon_0 = 8.99 \times 10^{9}\ \mathrm{N \cdot m^2/C^2} \qquad km=μ0/4π=10−7 T⋅m/Ak_\mathrm{m} = \mu_0/4\pi = 10^{-7}\ \mathrm{T \cdot m/A}

c=3.00×108 m/sc = 3.00 \times 10^{8}\ \mathrm{m/s} \qquad kB=1.38×10−23 J/Kk_\mathrm{B} = 1.38 \times 10^{-23}\ \mathrm{J/K}

NA=6.02×1023 (mol)−1N_\mathrm{A} = 6.02 \times 10^{23}\ (\mathrm{mol})^{-1} \qquad R=NAkB=8.31 J/(mol⋅K)R = N_\mathrm{A} k_\mathrm{B} = 8.31\ \mathrm{J/(mol \cdot K)}

σ=5.67×10−8 J/(s⋅m2⋅K4)\sigma = 5.67 \times 10^{-8}\ \mathrm{J/(s \cdot m^2 \cdot K^4)} \qquad e=1.602×10−19 Ce = 1.602 \times 10^{-19}\ \mathrm{C}

1eV=1.602×10−19 J1\mathrm{eV} = 1.602 \times 10^{-19}\ \mathrm{J} \qquad h=6.63×10−34 J⋅s=4.14×10−15 eV⋅sh = 6.63 \times 10^{-34}\ \mathrm{J \cdot s} = 4.14 \times 10^{-15}\ \mathrm{eV \cdot s}

me=9.109×10−31 kg=0.511 MeV/c2m_e = 9.109 \times 10^{-31}\ \mathrm{kg} = 0.511\ \mathrm{MeV/c^2} \qquad (1+x)n≈1+nx(1+x)^n \approx 1 + nx for ∣x∣≪1|x| \ll 1

sin⁡θ≈θ−16θ3\sin\theta \approx \theta - \frac{1}{6}\theta^3 for ∣θ∣≪1|\theta| \ll 1 \qquad cos⁡θ≈1−12θ2\cos\theta \approx 1 - \frac{1}{2}\theta^2 for ∣θ∣≪1|\theta| \ll 1

Условие

Researchers have developed a lens made of liquid. The spherical lens consists of a droplet of transparent liquid resting on an electrically controllable surface. When the voltage of the surface is changed, the droplet itself changes shape; it either tries to "ball-up" more strongly or it becomes flatter. The figure below is a sketch of the liquid lens and several parameters that describe it, including the thickness of the lens (tt), the radius of curvature of the top surface (RR) and the contact angle (θ\theta), which represents the angle between the flat surface beneath the droplet and the tangent to the curved surface at the point of contact.

Cross-section of a liquid droplet lens resting on a flat surface: a shaded circular cap of thickness t, dashed radii R from the centre of curvature below the surface to the two contact points, and a dotted tangent at the right contact point making the contact angle θ with the surface.

a. When a certain voltage is applied, both the contact angle and lens thickness increase (and the lens becomes more curved). In this case, is the liquid attracted or repelled by the surface?

b. Express the contact angle as a function of RR and tt.

c. The total volume of the liquid lens is an important parameter because as the liquid lens changes shape, its volume is conserved. Calculate the volume of the lens as a function of RR and tt.

d. Use your result to part (b) to eliminate the variable tt from your expression for the volume and find V(R,θ)V(R, \theta).

e. By changing the voltage on the control surface, the contact angle, θ\theta, can be changed, which in turn changes the focal length of the lens, ff. The lensmaker's formula can be used to calculate the focal length and is given by

1f=(nliquid−nair)(1R1−1R2),\frac{1}{f} = (n_\mathrm{liquid} - n_\mathrm{air})\left(\frac{1}{R_1} - \frac{1}{R_2}\right),

where nliquidn_\mathrm{liquid} and nairn_\mathrm{air} are the refractive indices of the liquid in the lens and air around it, and R1R_1 and R2R_2 are the radii of curvature of the two surfaces of the lens. In figure 1, R1R_1 is the curved face and R2R_2 is the flat face. Use the lensmaker's formula to calculate the focal length of the lens in terms of the total volume of the liquid, the contact angle, and the relevant refractive indices.

Sidenote: liquid lenses are interesting because they are electrically controllable, variable focus lenses that can be very compact. People are working on putting them into cell phone cameras for ultra-compact zoom lenses. For more information on this type of liquid lens, see T. Krupenkin, S. Yang, and P. Mach, "Tunable liquid microlens," Appl. Phys. Lett. 82, 316-318 (2003).

Решение

Внимание: Непълно решение

В архива няма официално решение на тази задача.


Оригинал в Архива: olympiad_2008_semi-final.pdf · официални решения: USAPhO-2008-Solutions.pdf